Наръчник Alecto ADB-19 Звънец

Наръчник

ADB-19 Installation

Outdoor-unit:

Indoor-unit:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Connecting:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1x1x

1x

<10 sec.

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

1x

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Alecto ADB-19 Звънец. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Alecto. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Alecto ADB-19 Звънец на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за Alecto Звънци за врати
Още ръководства на Звънци за врати

Свързани продукти

Наръчник

SilverCrest IAN 275101 Звънец

Наръчник

König SAS-WDB301 Звънец

Наръчник

Elro DB230 Звънец

Наръчник

Elro DB250 Звънец

Наръчник

SilverCrest IAN 104412 Звънец

Наръчник

Elro DB202 Звънец

Наръчник

Switch On SOTKK 16 B1 Звънец

Наръчник

SilverCrest STK 36V2 A1 Звънец

Свързани категории