Наръчник BEKO HNS91211X Аспиратор

Нуждаете се от ръководство за BEKO HNS91211X Аспиратор? По-долу можете да видите и изтеглите PDF ръководството безплатно на български език. В момента този продукт има 2 често задавани въпроси, 0 коментари и има 0 гласа. Ако това не е ръководството, което искате, моля свържете се с нас.

Продуктът ви дефектен ли е и ръководството не предлага решение? Отидете в Repair Café за безплатни ремонтни услуги.

Наръчник

Loading…

11
Mounting
The cooker hood may be installed on the wall or on the base
of a cabinet; if supplied, use the hole gauge H to drill the cor-
rect distance, otherwise lean the cooker hood on the wall or
on the base of the cabinet and mark the holes with a pencil.
Wall mounting - Insert the wall screw anchors J in the drilled
holes and the two K screws in the upper drill holes, remove
the grill and hook the cooker hood to the 2 screws, finally from
the inside, insert the third screw L and lock them all in.
Cabinet fixing - Affix the cooker hood with the 4 M screws
from inside the cabinet.
Operation
The hood is fitted with a control panel with aspiration speed
selection control and a light switch to control cooking area
lights.
Always open the vapour catcher N*.
If your product is provided with an electrically or mechanically
activated valve, the keys and/or the buttons and/or the han-
dles available are for controlling the lights and for opening and
closing the valve.
Maintenance
Cleaning
Clean using ONLY the cloth dampened with neutral liquid
detergent. DO NOT CLEAN WITH TOOLS OR INSTRU-
MENTS. Do not use abrasive products. DO NOT USE AL-
COHOL!
Grease filter
Traps cooking grease particles.
If situated inside the support grill, it may be one of the follo-
wing types:
Paper filter must be replaced once a month or if colouring
appears on upper side, in such cases the colouring is evident
through the grill openings.
Metallic filter must be cleaned once a month, with non abra-
sive detergents, by hand or in dishwasher on low temperature
and short cycle.
When washed in a dishwasher, the grease filter may discolour
slightly, but this does not affect its filtering capacity.
In order to remove the grease filter open the grill via the P
hooks and free the R1 or R2 stoppers.
The self-supporting metal filter does not include a support
grill, in order to remove the filter – pull the release springs P4
backwards and slide the filter downwards.
Charcoal filter (filter version only)
It absorbs unpleasant odors caused by cooking.
The saturation of the charcoal filter occurs after more or less
prolonged use, depending on the type of cooking and the
regularity of cleaning of the grease filter.
In any case it is necessary to replace the cartridge at least
every four months.
The charcoal filter may NOT be washed or regenerated.
It may be one of the following types:
Rectangular S1 or S2 or S3:
Mounting (S1 or S2) : insert the rear side T and hook further
to the front (U).
Mounting (S3): Remove the cover W by rotating the O knobs
to 90° ,fit the filter inside and lock in place with the central
knob O, then close the cover.
Proceed in the inverse for dismounting.
Circular (V1-V2-V3-various models):
Bayonet mount position the filter in the middle of the motor
protection grill covering ensuring that the reference to X1 or
X2 or X3 on the carbon filter match the Y1 or Y2 references
on the conveyor, then turn clockwise; in case of dismounting
turn anticlockwise, if provided with a Z tape remember to
gently lift first.
Replacing lamps
Disconnect the appliance from the electricity.
Warning! Prior to touching the light bulbs ensure they are
cooled down.
Replace the old light bulb with the one of the same type as
specified in the feature label or near the light lamp on the ho-
od.
Remove the grill.
Remove the damaged light and replace it with a new one (see
the table below):
Lamp Power (W) Socket
28 E14
Voltage (V) Dimension (mm)
230
67 (Light Center
Length)
ILCOS D Code
(according IEC 61231)
HSGSB/C/UB-28-230-E14-67
Put the grill back.
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical assi-
stance.
Изтегли ръководство на български (PDF, 2.62 MB)
(Помислете за околната среда и отпечатайте това ръководство само ако наистина е необходимо)

Loading…

оценка

Кажете ни какво мислите за BEKO HNS91211X Аспиратор, като дадете оценка на продукта. Искате ли да споделите опита си с този продукт или да зададете въпрос? Моля, оставете коментар в долната част на страницата.
Доволни ли сте от BEKO HNS91211X Аспиратор?
да Не
Бъдете първи, оценили този продукт
0 гласове

Присъединете се към разговора за този продукт

Тук можете да споделите какво мислите за BEKO HNS91211X Аспиратор. Ако имате въпрос, първо прочетете внимателно ръководството. Заявката за ръководство може да бъде направена чрез нашата форма за контакт.

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия BEKO HNS91211X Аспиратор. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с BEKO. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия BEKO HNS91211X Аспиратор на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Марка BEKO
Модел HNS91211X
Категория Кухненски аспиратори
Тип файл PDF
Размер на файла 2.62 MB

Всички ръководства за BEKO Кухненски аспиратори
Още ръководства на Кухненски аспиратори

Често задавани въпроси за BEKO HNS91211X Аспиратор

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Колко разстояние трябва да има между аспиратора и котлона? Проверен

Това може да е много малко в зависимост от марката, но като цяло абсорбаторът трябва да се постави на поне 65 сантиметра над газовия котлон и поне на 50 сантиметра над електрическия или индукционния котлон. Това е за подобряване на пожарната безопасност

Това беше полезно (1352) Прочетете още

Имам ли нужда от абсорбатор с или без двигател? Проверен

Аспираторите с мотор са предназначени, когато въздухът се движи директно навън. Аспираторът без мотор е предназначен, когато има централна вентилационна система. Никога не свързвайте абсорбатор с мотор към централна вентилационна система!

Това беше полезно (793) Прочетете още
Наръчник BEKO HNS91211X Аспиратор

Свързани продукти

Свързани категории

×
Download