Наръчник EGO HT2411E Нож за жив плет

Наръчник

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E/HT2000E6

EN

NOTICE: The tool is to be used only for its prescribed

purpose. Any other use is deemed to be a case of misuse.

INSTALLING/REMOVING THE BATTERY PACK

Use only with battery packs and chargers listed

in fig.A2.

Charge before first use.

To Install (Fig. B)

Align the battery ribs with the mounting slots and press

the battery pack down until you hear a “click”.

To Remove (Fig. C)

Depress the battery-release button and pull the battery

pack out.

WARNING: Always be aware for the location of your

feet, children, or pets when pressing the battery-release

button. Serious injury could result if the battery pack falls.

NEVER remove the battery pack at a high location.

HOLDING THE HEDGE TRIMMER (Fig. D, E & F)

The unit has both a front and rear handle. With the blade

directed away from you, hold the unit by both handles.

The switch lever in the front handle can be activated on

any of the three sides, giving you many choices for a

comfortable grip when performing cutting operations.

WARNING: Always keep both hands on the hedge

trimmer handles. Never hold shrubs with one hand while

operating the hedge trimmer with the other hand. Failure

to heed this warning may result in serious injury.

STARTING/STOPPING THE HEDGE TRIMMER

Before operating, remove the shield and hold the trimmer

with both hands, one hand on the rear handle and the

other on the front handle. Then check for stable footing,

upright standing and a proper cutting distance.

To Start

1. Install the battery pack.

2. Depress and hold the switch lever in the front handle

with one hand.

3. Press and hold the lock-off button with the thumb of

your other hand, then squeeze the rear switch lever

with your fingers to start the hedge trimmer. Release

the lock-off button and continue to squeeze the

trigger for continued operation.

To Stop

Move the hedge trimmer away from the cutting area and

release the rear switch lever to stop the hedge trimmer.

WARNING: Always remove the battery pack from

the hedge trimmer during work breaks and after finishing

work.

USING THE HEDGE TRIMMER

WARNING: If the blade jams on any electrical cord

or line, DO NOT TOUCH THE BLADE! IT CAN BECOME

ELECTRICALLY LIVE AND VERY DANGEROUS. Continue

to hold the hedge trimmer by the insulated rear handle

or lay it down and away from you in a safe manner.

Disconnect the electrical service to the damaged line or

cord before attempting to free the blade from the line or

cord. Failure to heed this warning will result in serious

personal injury or possible death.

WARNING: Avoid trimming too much at one time or

through the heavy shrubbery. This can cause the blades to

bind and slow, reducing the cutting efficiency.

NOTICE: The trimmer shall be used to cut stems less

than (26mm) thick.

NOTICE: For new growth, a wide sweeping is suitable

for the stems fed directly into the cutting blade. For older

growth, a sawing movement is good for trimming the

thicker stems. A non-powered hand saw or pruning saw is

suggested for trimming the large stems first.

Top Cutting

Use a wide sweeping motion. A slight downward tilt of the

cutting blades in the direction of motion gives the best

cutting results. For better cutting effect, you might as well

use the string to guide the hedge level as Fig. G shown.

Side Cutting

When trimming the sides of the hedge, begin at the

bottom and cut upwards as Fig. H shown. Trim the side of

a hedge so that it will be slightly narrower at the top. This

shape will expose more of the hedge to sunlight, resulting

in a more uniform growth.

MAINTENANCE

WARNING: When servicing, use only identical

replacement parts. Use of any other parts may create a

hazard or cause product damage. To ensure safety and

reliability, all repairs should be performed by a qualified

service technician.

WARNING: To avoid serious personal injury, always

remove the battery pack from the product when cleaning

or performing any maintenance.

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия EGO HT2411E Нож за жив плет. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с EGO. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия EGO HT2411E Нож за жив плет на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за EGO Резачки за жив плет
Още ръководства на Резачки за жив плет

Често задавани въпроси за EGO HT2411E Нож за жив плет

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

EGO HT2000E Нож за жив плет

Наръчник

EGO HT2401E Нож за жив плет

Наръчник

EGO HTX7500S Нож за жив плет

Наръчник

EGO HT6500E Нож за жив плет

Наръчник

EGO HT2410E Нож за жив плет

Наръчник

EGO HTX6500 Нож за жив плет

Наръчник

EGO PTX5100 Нож за жив плет

Наръчник

EGO HT5110E Нож за жив плет

Свързани категории