Наръчник First Austria FA-5628-8 Желязо

Наръчник

4 5

ENGLISH

ENGLISH

CLEANING & MAINTENANCE

• Always unplug the appliance from power

before cleaning.

• Never immerse the appliance or power cord in

water. Do not let the electrical parts come into

contact with moisture.

• Clean the housing of the unit with a damp

cloth and then wipe it dry.

• Deposits and other residues on the sole plate

can be removed with a little vinegar.

• Do not use any abrasives to clean the sole

plate!

• Always store the iron in an upright position.

Environment friendly disposal

You can help protect the environment!

Please remember to respect the local

regulations: hand in the non-working electrical

equipment to an appropriate waste disposal

center.

the iron. Do not add anything to the water as this

may damage the iron.

• Make sure that the appliance is disconnected

from the mains and has cooled down.

• Set the temperature control to min/o and the

steam control to “no steam”. (

)

• Open the cover and poor water from the cup

into the water inlet - Do not overll.

• Close the cover and wipe up any spilled water.

SWITCH ON

• Place the iron upright and connect the power

cord to the mains.

• Set the temperature control to the correct

temperature for the fabric.

• During heating, the indicator light is on.

• When the iron reaches the set temperature,

the light will go o. It will then cycle on and

o as the thermostat operates to maintain the

temperature.

TEMPERATURE SETTINGS GUIDE

Fabric label Setting

Lower temperature

(synthetics, nylon, acrylics,

polyester)

Medium temperature

(wool, polyester mixtures)

High temperature

(cotton, linen)

/ max

Do not iron

Note: If the instructions on the fabric label dier

from this guide, follow the instructions on the

label.

STEAM IRONING

If you intend to use steam, it can only be used at

higher ironing temperatures.

• Set the temperature control close to or

maximum.

• Set the steam control to “steam”. ( / )

• Wait until the indicator light goes o, then start

ironing.

SPRAY

The water spray function can be used at any time

without aecting the ironing temperature.

• Lift the iron o the fabric.

• Aim the spray nozzle on the front of the iron at

the fabric.

• Press the spray button. (You may have to

press a few times to pump water through the

system.)

BURST OF STEAM

This function provides an extra amount of steam

to remove suborn wrinkles.

If you intend to use the steam burst, it can only be

used at high ironing temperatures.

• Lift the iron o the fabric.

• Press the steam burst button. (You may have to

press a few times to pump water through the

system.)

• Wait a few seconds between steam bursts to

allow the steam to build up again.

• By pressing the steam burst button at intervals,

you can iron vertically. This is especially useful

for curtains, hanging garments, etc.

DRY IRONING

• Set the steam control to “no steam”. (

)

• Set the temperature control to a setting

appropriate for the garment.

• Wait until the indicator light goes o, then start

ironing.

AFTER USE

• Set the temperature control to minimum (OFF).

• Set the steam control to “no steam”. ( )

• Place the iron upright and unplug it.

• Let it cool down completely.

• Open the cover and empty the remaining

water from the tank into a sink.

• Proceed with “CLEANING & MAINTENANCE”

SELF CLEAN

Use the self-clean function once a month to

prevent the formation of limescale deposits. If the

water in your area is very hard, you should use the

self-cleaning more often.

• You will need a sink or a large bowl to catch the

water coming out if the soleplate.

• Make sure the appliance is unplugged.

• Set the steam control to “no steam”. ( )

• Fill the tank to maximum level.

• Place the iron upright and connect the power

cord to the mains.

• Select the maximum ironing temperature.

• Wait until the indicator light goes o.

• Hold the iron with soleplate down over the

sink or bowl.

• Press and hold the self-clean button and gently

move the iron back and forth. - Steam and

water will come out of the soleplate. Impurities

and akes of lime will be ushed out.

• Continue until the water tank is empty.

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия First Austria FA-5628-8 Желязо. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с First Austria. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия First Austria FA-5628-8 Желязо на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за First Austria Ютии
Още ръководства на Ютии

Често задавани въпроси за First Austria FA-5628-8 Желязо

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

First Austria FA-5628-9 Желязо

Наръчник

First Austria FA-5618-9 Желязо

Наръчник

First Austria FA-5627-4 Желязо

Наръчник

First Austria FA-5640-2 Желязо

Наръчник

First Austria FA-5618-8 Желязо

Наръчник

First Austria FA-5627-3 Желязо

Наръчник

First Austria FA-5627-2 Желязо

Наръчник

First Austria FA-5633-4 Желязо

Свързани категории