Наръчник Hama 00050540 Шредер за хартия

Нуждаете се от ръководство за Hama 00050540 Шредер за хартия? По-долу можете да видите и изтеглите PDF ръководството безплатно на български език. В момента този продукт има 2 често задавани въпроси, 0 коментари и 1 глас със среден рейтинг на продукта 0/100. Ако това не е ръководството, което искате, моля свържете се с нас.

Продуктът ви дефектен ли е и ръководството не предлага решение? Отидете в Repair Café за безплатни ремонтни услуги.

Наръчник

Loading…

3
General warning symbol
Before commissioning, read the enclosed operating
instructions.
You must comply with the safety instructions at all times.
This device is not intended for use by children.
Avoid touching the intake opening with hands, clothing
or hair.
Unplug the device if it is not going to be used for a
prolonged period.
Children must be supervised when using the device.
Do not insert paper clips into the intake shaft.
Do not reach into the intake shaft.
Keep clothing away from the intake shaft.
Keep jewellery, e.g. necklaces, away from the intake shaft.
Keep hair away from the intake shaft.
Do not use any aerosol products on or near the device.
Do not feed CDs/DVDs into the feed shaft.
Insert no more than 6 sheets of paper at any one time into the
intake shaft (see 7. Technical Data).
3. Installation / Setup
Warning
Only operate the product from a socket that has been approved for the device. The
socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch if this is not
available, unplug the power cord from the socket.
If using a multi-socket power strip, make sure that the total power consumption of
all connected devices does not exceed the power strip's maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from
mains power.
Position the device head (1) on a suitable waste paper basket. To do this, extend the
extendable arm (2) as far as necessary out of the device head (1).
Ensure that the device head (1) is positioned rmly on the waste paper basket and does
not wobble.
Note
Position the waste paper basket with the product on top of it on a level, horizontal
and suciently stable surface.
Route all cables so that there is no risk of tripping.
Do not bend or crush the cable.
Protect the connecting cable from hot surfaces and sharp edges.
Connect the mains cable to a properly installed and easily accessible mains socket.
4. Operation
Note
Be aware that the thickness of paper increases when it is folded, leading to the
device's maximum page capacity being exceeded.
Always wait until one cutting operation is nished before starting the next one.
Do not use the device continuously for more than 2 minutes at a time.
Empty the container regularly in order avoid damaging the device.
4.1 Switching the device on
Move the slider switch (5) to the "I" position (6).
The cutting rollers are switched on and operate constantly.
The device is now ready for use.
4.2 Switching the device off
Move the slider switch (5) to the "O" position (7).
4.3 Shredding paper
Insert the paper into the centre of the intake shaft (3).
Let go of the paper. Move the slider switch (5) to the "O" position (7) once the shredding
process is complete.
4.4 Forwards / backwards mode
Note
These modes are designed to release any blockages of the cutting mechanism.
Move the slider switch (5) to the "<<" position (8). The rollers on the cutting mechanism
now rotate in the reverse direction.
Move the slider switch (5) alternately to the "I" position (6) and the "<<" position (8).
Repeat this process around three times.
Then switch the device off - as described in 4.2 Switching the device off - and
disconnect the mains plug.
Remove the blocked cut material carefully from the intake shaft (3).
Reconnect the device - as described in 3. Installation/Setup - to the power supply.
Изтегли ръководство на български (PDF, 1.09 MB)
(Помислете за околната среда и отпечатайте това ръководство само ако наистина е необходимо)

Loading…

оценка

Кажете ни какво мислите за Hama 00050540 Шредер за хартия, като дадете оценка на продукта. Искате ли да споделите опита си с този продукт или да зададете въпрос? Моля, оставете коментар в долната част на страницата.
Доволни ли сте от Hama 00050540 Шредер за хартия?
да Не
0%
100%
1 гласуване

Присъединете се към разговора за този продукт

Тук можете да споделите какво мислите за Hama 00050540 Шредер за хартия. Ако имате въпрос, първо прочетете внимателно ръководството. Заявката за ръководство може да бъде направена чрез нашата форма за контакт.

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Hama 00050540 Шредер за хартия. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Hama. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Hama 00050540 Шредер за хартия на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Марка Hama
Модел 00050540
Категория Шредери за хартия
Тип файл PDF
Размер на файла 1.09 MB

Всички ръководства за Hama Шредери за хартия
Още ръководства на Шредери за хартия

Често задавани въпроси за Hama 00050540 Шредер за хартия

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Защо моят шредер за хартия спира след определен период? Проверен

Шредерите за хартия трябва да се охладят след известно време, за да се предотврати прегряване. Времето, през което устройството може да работи, преди да има нужда от охлаждане, варира при различните марки и модели.

Това беше полезно (915) Прочетете още

Колко често трябва да смазвам своя шредер за хартия? Проверен

При случайна употреба е достатъчно да смазвате шредера за хартия веднъж на всеки два месеца. При (много) редовна употреба може да забележите, че машината има затруднения с раздробяването или че хартията лесно засяда. Това са знаци, че машината трябва да се смаже.

Това беше полезно (577) Прочетете още
Наръчник Hama 00050540 Шредер за хартия

Свързани продукти

Свързани категории

×
Download