Наръчник Philips GC6740 Желязо

Наръчник

7

Using the appliance

Ironing

Temperature setting Automatic steam setting Fabric type

SYNTH to ● Synthetic fabrics (e.g., acetate, acrylic, nylon, viscose,

polyamide, polyester)

●●

Silk, wool

●●● to LINEN Cotton, linen

1 Place the appliance on a stable and even surface.

Note: In order to ensure safe ironing we recommend to always place the base on a stable ironing board.

2 Make sure that there is enough water in the water tank.

3 Remove the mains cord and water supply hose from the storage compartment.

4 Put the mains plug in an earthed wall socket and press the on/o switch to switch on the appliance.

5 Turn the temperature dial to set the appropriate temperature according to the table above. The appliance adjusts the

steam automatically depending on the temperature chosen.

Note: refer to the garment label for recommended temperature setting. Do not iron non-ironable fabrics.

6 Wait until the ‘iron ready’ light lights up continuously (Fig. 4). This takes about 2 minutes.

7 For GC6730, GC6740 series only: press the carry lock release button to unlock the iron from the iron platform (Fig. 5).

8 Press and hold the steam trigger to start ironing (Fig. 6).

Warning: Never direct steam at people.

Note: When you use the appliance for the rst time, it may take 30 seconds for steam to come out of the appliance.

Note: The pump is activated each time you press the steam trigger. It produces subtle rattling sound, which is normal.

When there is no water in the water tank, the pump sound is louder. Fill up the water tank with water when the water

level drops below the minimum level.

Steam boost function

1 Press the steam trigger twice quickly to release a powerful boost of steam for 3 seconds (Fig. 7).

Note: it is recommended to use the steam boost function only for stubborn crease.

Vertical ironing

Warning: Hot steam is emitted from the iron. Never attempt to remove wrinkles from a garment while someone is

wearing it (Fig. 8). Do not apply steam near your or someone else’s hand.

You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.

1 Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the soleplate and move

the iron up and down (Fig. 9).

Auto shut-o

- The appliances enters the standby mode if it has not been used for 15 minutes. The “iron ready” light starts to ash.

- To activate the appliance again, press the steam trigger. The appliance starts to heat up again.

- The appliance switches o automatically if it has not been used for another 10 minutes after it enters the standby

mode. The “iron ready” light goes o.

English

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Philips GC6740 Желязо. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Philips. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Philips GC6740 Желязо на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за Philips Ютии
Още ръководства на Ютии

Често задавани въпроси за Philips GC6740 Желязо

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

Philips PSG9030 PerfectCare Желязо

Наръчник

Philips DST8050 Azur Желязо

Наръчник

Philips DST7040 Желязо

Наръчник

Philips GC9410 Желязо

Наръчник

Philips PSG2000 Желязо

Наръчник

Philips GC9247 PerfectCare Желязо

Наръчник

Philips PSG8300 PerfectCare Желязо

Наръчник

Philips GC8717 PerfectCare Performer Желязо

Свързани категории