Наръчник Ryobi RY18HT55A Нож за жив плет

Наръчник

■ If the product is dropped, suffers heavy impact, or begins

to vibrate abnormally, immediately turn off the product

and inspect for damage or identify the cause of the

vibration. Any damage should be properly repaired or

replaced by an authorised service centre.

■ Operate the product only in temperatures between 0°C

and 40°C.

■ Store the product in a location where the ambient

temperature is between 0°C and 40°C.

ADDITIONAL BATTERY SAFETY WARNINGS

■ To reduce the risk of fire, personal injury, and product

damage due to a short circuit, never immerse the tool,

battery pack, or charger in fluid or allow fluid to flow

inside them. Corrosive or conductive fluids, such as

seawater, certain industrial chemicals, and bleach or

bleach-containing products, etc., can cause a short

circuit.

■ Charge the battery pack in a location where the ambient

temperature is between 10°C and 38°C.

■ Store the battery pack in a location where the ambient

temperature is between 0°C and 40°C.

■ Use the battery pack in a location where the ambient

temperature is between 0°C and 40°C.

TRANSPORTATION AND STORAGE

■ Turn off the product, remove the battery pack, and allow

both to cool down before storing or transporting.

■ Remove all foreign materials from the product. Store

the product in a cool, dry, and well-ventilated area

that is inaccessible to children. For extra safety, store

the battery pack separately from the product. Keep the

product away from corrosive agents such as garden

chemicals and de-icing salts. Do not store the product

outdoors.

■ For transportation, secure the product against movement

or falling to prevent injury to persons or damage to the

product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps or

tape. Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

MAINTENANCE

■ Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can cause

possible injury, can contribute to poor performance, and

may void your warranty.

■ Servicing requires extreme care and knowledge

and should be performed only by a qualified service

technician. Have the product serviced by an authorised

service centre only.

■ The blades are extremely sharp. To prevent personal

injury, exercise extreme caution when cleaning,

lubricating, fitting, or removing the blade protector.

■ Remove the battery pack before adjusting, maintaining,

or cleaning the product.

■ You may make adjustments and repairs described in this

manual. For other repairs, have the product serviced by

an authorised service centre only.

■ After each use, clean the plastic parts with a soft, dry

cloth.

■ After each use, clean the debris from the blades with a

stiff brush, and then carefully apply a rust preventative

lubricant before refitting the blade protector. The

manufacturer recommends using rust preventative

lubricant spray to apply an even distribution and reduce

the risk of personal injury from contact with the blades.

For information about a suitable spray product, check

with an authorised service centre.

■ Check all nuts, bolts, and screws at frequent intervals

for proper tightness to ensure that the product is in safe

working condition. Any part that is damaged should be

properly repaired or replaced by an authorised service

centre.

KNOW YOUR PRODUCT

See page 104.

1. Blade

2. Blade guard

3. Front handle

4. Rear handle

5. Trigger

6. Blade cover

7. HEDGESWEEP debris sweeper

8. Manual

9. Battery

10. Charger

ANTI-JAM FUNCTION

The RY18HTX60A hedge trimmer has an anti-jam function

to release the blades in case the blades are jammed by big

or hard branches. If the blades are jammed, activate the

anti-jam function by squeezing the front handle, then rapidly

pressing the rear handle trigger twice. The blades will open,

and normal operation can resume.

SYMBOLS ON THE PRODUCT

Safety alert

Read the instructions carefully before

starting the product.

Wear ear protection.

Wear eye protection.

Wear non-slip, heavy-duty gloves.

Always hold the hedge trimmer with

both hands when operating.

Do not expose the product to rain or

damp condition.

5

Original Instructions

ENGLISH

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Ryobi RY18HT55A Нож за жив плет. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Ryobi. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Ryobi RY18HT55A Нож за жив плет на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за Ryobi Резачки за жив плет
Още ръководства на Резачки за жив плет

Често задавани въпроси за Ryobi RY18HT55A Нож за жив плет

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

Ryobi OHT1850H Нож за жив плет

Наръчник

Ryobi HT-3012A Нож за жив плет

Наръчник

Ryobi RHT6060RS Нож за жив плет

Наръчник

Ryobi RHT6560RL Нож за жив плет

Наръчник

Ryobi RY36HTX65A Нож за жив плет

Наръчник

Ryobi RHT5555RSH Нож за жив плет

Наръчник

Ryobi OHT1851R Нож за жив плет

Наръчник

Ryobi RHT1850H25HS Нож за жив плет

Свързани категории