Home > Кухненски съдове и прибори > Орбитални миксери > Zelmer Орбитални миксери > Zelmer ZKR2010 Стойка миксер

Наръчник Zelmer ZKR2010 Стойка миксер

Нуждаете се от ръководство за Zelmer ZKR2010 Стойка миксер? По-долу можете да видите и изтеглите PDF ръководството безплатно на български език. В момента този продукт има 0 често задавани въпроси, 0 коментари и има 0 гласа. Ако това не е ръководството, което искате, моля свържете се с нас.

Продуктът ви дефектен ли е и ръководството не предлага решение? Отидете в Repair Café за безплатни ремонтни услуги.

Наръчник

ENEN

4. Mixing cocktails, drinks or other liquids

Use whisk (7) to mix cocktails, drinks and other liquids.

• Mix the ingredients according to the required recipe for approximately 3 to 5 minutes at speed setting 1

to 12. Do not exceed the maximum capacity of the mixing bowl. Do not use for longer than 15 minutes.

Do not use for more than 15 minutes. If more time is needed, wait until the appliance has cooled completely

after switching it off, then continue operation.

SUGGESTION

Accessories Picture Speed Time min. Maximum Operation method

Dough hook

1-3 6-10 1500g our

+900g water

Speed level:

1 - 30 s.

2 - 30 s.

3 - Max: 9 min.

Beater

1-12 3-15 660g our

+840g water

Speed level: 1 - 12 from 3

to 15 min.

Whisk

1-12 3-15 12 eggs

Speed level: 1 - 12 from 3

to 15 min.

ANALYSIS OF COMMON PROBLEMS

Problem Causes Solutions

The machine suddenly stops

working during use.

It may be that the machine runs

too long, or the ambient tempe-

rature is too high, resulting in the

machine’s motor temperature be-

ing too high; the machine starts the

overheating protection program,

automatic shutdown.

Gear reset to “0”, unplug the

power, wait for the machine to

return to room temperature can be

restarted (generally need 15-30

minutes, the room temperature

varies cooling time).

Turning the gear knob machine

does not run

Check if the plug is in good contact

with the socket.

Verify that the power plug is plug-

ged into the outlet

Check if the power is out. Wait for power before operating

Check if the rise button spring

back in place.

Make sure the headstock is stuck

in place.

Excessive noise when the machine

is running

1 The machine will work louder in

high gear than in low gear.

2 The amount of food stirred is too

large, resulting in overloading the

machine.

3 Voltage is unstable.

4 Working time is too long.

1 Choose the right gear to stir food

according to the recommendations

in the manual

2 Reduce the amount of stirring.

3 If the voltage is unstable, wait

for the voltage to stabilize before

using.

4 If the working time is too long,

stop and cool down for a while

before using.

The machine speed drops, or the

speed is unstable

1 Whether the room temperature

is low, causing the lubricant in the

machine to harden.

2 The ingredients stirred are too

hard and too much, resulting in too

much load on the machine.

3 Whether the voltage suddenly

becomes low.

1 Remove the mixing bowl and let

the machine idle for 5 minutes to

soften the lubricant in the machine

and restore the speed stability.

2 Reduce the mixing volume and

let the machine work according to

the normal workload.

3 When the voltage is stable, use

the machine again.

Machine swaying and shaking

when working

1 Check if the foot pad on the base

is off.

2 Whether the machine is placed

on a smooth and at countertop

for use.

1 Check if the foot pad on the base

is off.

2 Place on a smooth and at coun-

tertop for use

The headstock can’t spring back

to reset after putting on the an-

ti-splash cover and mixing bowl

Check that the anti-splash cover

is in place and the mixing bowl is

assembled.

Rotate the anti-splash cover and

assemble it in place, and assemble

the mixing pot in place.

Dough darkening found after use Black powder falls onto the dough

at the mixing head.

Please check that the mixing head

and hook are dry and that no water

or dust is present on the surface

before use.

E2 The machine didn’t detect the

motor temperature

Please contact after sale Zelmer

service

E3 Overload protection,the machine

will automaticly switch off

Please take some ingredients from

the bowl.

E4 The machine didn’t detect the

feedback of sensor

Please contact after sale Zelmer

service

H Overheat protection Please wait the machine cool down

completely. Then the machine can

be restarted

CLEANING

Body Cleaning 1. Do not immerse the machine in the water. Do not use water to shower di-

rectly on top of the machine to prevent the host body from entering the water

to avoid short circuits, electric shock, leakage, rust, and other failures.

2. Do not use a dripping wet towel to wipe the machine

3. Do not use detergent/vinegar/salt and other corrosive, strongly acidic,

strong alkaline cleaning products to clean the machine body, otherwise acces-

sible to damage the machine’s surface.

4. Do not use sharp and rough tools such as wire balls to brush the acces-

sories. Otherwise, it is easy to damage the surface of the accessories.

Accessory Cleaning 1. Do not put the cast aluminum parts into the dishwasher or wash them with

corrosive, strongly acidic, or alkaline cleaning products. Please do not put

them into the dishwasher for cleaning. (Except for stainless steel parts or

surface-treated Teon parts and electrophoresis parts: 4a, 4b, 5, 6, 7)

2. Do not soak for a long time in detergent, saltwater, vinegar, and other

corrosive liquids; use in time to clean accessories.

3. After cleaning, dry the accessories, mainly to keep the internal parts dry in

time.

Special Cleaning 1. The rotating output shaft will produce a bit of black trace due to high speed

and friction when the machine is working. After each use, please clean it

promptly and keep the part dry.

2. Pay attention to the sharp blade and related sharp edge parts or acces-

sories.

Изтегли ръководство на български (PDF, 9.22 MB)

(Помислете за околната среда и отпечатайте това ръководство само ако наистина е необходимо)

оценка

Кажете ни какво мислите за Zelmer ZKR2010 Стойка миксер, като дадете оценка на продукта. Искате ли да споделите опита си с този продукт или да зададете въпрос? Моля, оставете коментар в долната част на страницата.

Доволни ли сте от Zelmer ZKR2010 Стойка миксер?
да Не

Бъдете първи, оценили този продукт

0 гласове

Присъединете се към разговора за този продукт

Тук можете да споделите какво мислите за Zelmer ZKR2010 Стойка миксер. Ако имате въпрос, първо прочетете внимателно ръководството. Заявката за ръководство може да бъде направена чрез нашата форма за контакт.

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Zelmer ZKR2010 Стойка миксер. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Zelmer. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Zelmer ZKR2010 Стойка миксер на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.