Наръчник Parkside IAN 273439 заварчик

Наръчник

9 GB

Safety information

Safety information

from hazardous rays (heat and UV rays) and

glowing metal and weld splashes.

Wear solid, insulating shoes. The shoes should

also insulate when exposed to moisture. Low

shoes are not suitable, as glowing metal drops

falling could cause burns.

Wear suitable protective clothing, no synthetic

garments.

Do not look into the arc with unprotected eyes,

only use a welding shield with approved pro-

tective glass per DIN. In addition to light- and

heat rays which could result in blinding or burns,

the arc also emits UV rays. Without adequate

protection, this invisible ultraviolet radiation

causes very painful conjunctivitis which is only

noticed a few hours later. UV rays further cause

burns similar to a sunburn in unprotected areas

of the body.

Persons near the arc or assistants must also be

informed of the risks and outfitted with the nec-

essary protection. If necessary, set up protective

panels.

Ensure an adequate supply of fresh air whilst

welding, particularly in small spaces, as it pro-

duces smoke and harmful gasses.

Do not weld containers in which gasses, fuels,

mineral oils, etc. were stored - even if emptied

a long time ago - as residue poses an explosion

hazard.

Special regulations apply in rooms posing fire-

and explosion hazards.

Welded joints exposed to great strain and

needing to meet certain safety requirements

must be made by specially trained and certi-

fied welders. Examples are pressure vessels,

running rails, tow couplings, etc.

ATTENTION! Always connect the earth termi-

nal as close as possible to the point of weld to

provide the shortest possible path for the weld-

ing current from the electrode to the earth ter-

minal. Never connect the earth terminal to the

housing of the welding equipment!

Never connect the earth terminal to earthed

parts far away from the work piece, e.g. a

water pipe in another corner of the room. This

could otherwise damage the protective bond-

ing system of the room you are welding.

Do not use the welding equipment in the rain.

Do not use the welding equipment in a moist

environment.

Only place the welding equipment in a level

location.

The output is rated at an ambient temperature

of 20 °C. The welding time may be reduced in

higher temperatures.

Danger of electric shock:

Electric shock from a welding electrode

can be fatal. Do not weld in rain or snow.

Wear dry insulating gloves. Do not touch

the electrode with bare hands. Do not wear wet or

damaged gloves. Protect yourself from electric shock

by insulating from the work piece. Do not open the

equipment housing.

Danger due to welding smoke:

Inhaling welding smoke can jeopardize your health.

Keep your head out of the smoke. Use facilities in

open areas. Use ventilation to remove smoke.

Danger due to welding sparks:

Welding sparks can cause an explosion or fire.

Keep flammables away from the welding area. Do

not weld next to flammables. Welding sparks can

cause a fire. Keep a fire extinguisher nearby and

an observer ready to use it. Do not weld on top of

drums or any closed containers.

Danger due to arc rays:

Arc rays can damage the eyes and injure the skin.

Wear a hat and safety goggles. Wear hearing pro-

tection and a closed, high shirt collar. Wear welding

helmets and proper filter sizes. Wear full personal

protection.

Danger due to electromagnetic fields:

Welding current produces electromagnetic fields.

Do not use along with medical implants. Never wrap

the welding cables around the body. Consolidate

welding cables.

273439_Elektro-Schweissgeraet_PESG 120 B2_content_HR_RO_BG_GR.indd 9 18.01.16 16:38

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Parkside IAN 273439 заварчик. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Parkside. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Parkside IAN 273439 заварчик на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за Parkside Заварчици
Още ръководства на Заварчици

Често задавани въпроси за Parkside IAN 273439 заварчик

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

Parkside IAN 270751 заварчик

Наръчник

Parkside IAN 281479 заварчик

Наръчник

Parkside IAN 280331 заварчик

Наръчник

Parkside IAN 306962 заварчик

Наръчник

Parkside IAN 310850 заварчик

Наръчник

Parkside IAN 314788 заварчик

Наръчник

Parkside IAN 70383 заварчик

Наръчник

Parkside IAN 286510 заварчик

Свързани категории