Наръчник Parkside IAN 273439 заварчик

Наръчник

10 GB

Safety information / Assembling the welding shield / Preparing to weld

Safety notices specific to the

welding shield

Using a hot light source (e.g. lighter) always

check the welding shield is working properly

before starting to weld.

Welding splashes can damage the glass shield.

Replace damaged or scratched glass shields

immediately.

Promptly replace damaged or heavily soiled /

splashed components.

The equipment may only be operated by per-

sons who have turned 16.

Familiarise yourself with the safety instructions

for welding. Also refer to the safety instructions

of your welding equipment.

Always use the welding shield when welding.

Failure to use the shield may result in serious in-

juries to the retina.

Always wear protective clothing when welding.

Never use the welding shield without protective

glass, as the optics can otherwise be damaged.

Replace the protective glass early to ensure g

ood

visibility and fatigue-proof working.

Tight and moist spaces

When working in tight, moist or hot spaces, use

insulating pads and intermediate layers in ad-

dition to gauntlet gloves made from leather or

other insulating materials to insulate the body

from earth.

When using welding equipment in electrically

dangerous conditions, e.g. in tight spaces from

conductive walls (kettles, pipes, etc.), in wet

spaces (soaking of work clothes), the output

voltages of the welding equipment may not be

higher than 48 Volts (rms value) in open loop.

Based on the output voltage this welding equip-

ment may be used in these conditions.

Protective clothing

Whilst working the welder must be protected

against rays and burns all over the body with

the appropriate clothing and face protection.

Remember the following steps:

- Put on protective clothing before welding.

- Put on gloves.

- Open windows or vent to ensure air supply.

- Wear safety goggles and a mask.

Wear gauntlet gloves made from suitable ma-

terial (leather) on both hands. These must be

in good condition.

Wear suitable aprons to protect the clothing

from sparks and burns. When required based

on the working method, e.g. welding overhead,

wear a protective suit and, if necessary, a head

guard.

Protecting against

rays and burns

Mark the work area with a sign “Danger! Do

not look into flames!“ to indicate the risk to the

eyes. If possible, shield the work areas to protect

persons nearby. Keep unauthorised persons

away from the welding area.

Walls in the direct vicinity of fixed work areas

should be neither light coloured nor glossy.

Protect windows against rays passing through

or reflecting at a minimum to head height, e.g.

with suitable paint.

Assembling the welding shield

Attach the handle

8

to the welding shield

7

as shown in Fig. B.

Install the protective glass

10

to the welding

shield

7

as shown in Fig. B.

Then fold the three sides of the welding shield.

The two sides each connect to the top with two

press studs.

Preparing to weld

Note: When activating the power verify the current

indicator moves and the lead screw is not jammed.

Preparing to weld / Welding / Overheat protection

273439_Elektro-Schweissgeraet_PESG 120 B2_content_HR_RO_BG_GR.indd 10 18.01.16 16:38

оценка

Повече за това ръководство

Разбираме, че е хубаво да имате хартиено ръководство за вашия Parkside IAN 273439 заварчик. Винаги можете да изтеглите ръководството от нашия уебсайт и да го отпечатате сами. Ако искате да имате оригинално ръководство, препоръчваме ви да се свържете с Parkside. Може да са в състояние да предоставят оригинално ръководство. Търсите ли ръководството на вашия Parkside IAN 273439 заварчик на различен език? Изберете предпочитания от вас език на началната ни страница и потърсете номера на модела, за да видите дали го предлагаме.

Спецификации

Всички ръководства за Parkside Заварчици
Още ръководства на Заварчици

Често задавани въпроси за Parkside IAN 273439 заварчик

Нашият екип за поддръжка търси полезна информация за продукта и отговори на често задавани въпроси. Ако откриете неточност в нашите често задавани въпроси, моля, уведомете ни, като използвате нашата форма за контакт.

Свързани продукти

Наръчник

Parkside IAN 270751 заварчик

Наръчник

Parkside IAN 281479 заварчик

Наръчник

Parkside IAN 280331 заварчик

Наръчник

Parkside IAN 306962 заварчик

Наръчник

Parkside IAN 310850 заварчик

Наръчник

Parkside IAN 314788 заварчик

Наръчник

Parkside IAN 70383 заварчик

Наръчник

Parkside IAN 286510 заварчик

Свързани категории